Electronic Ballast dl 300
- DESCRIPTION
- TECHNICAL DATA
- MODEL
- ACCESSORIES
- OBTAIN AN OFFER
The ballast is suitable for 3, 10, and 12 V deuterium lamps and, after successful ignition, switches automatically from heat-up to operational heating voltage.
The anode current is present to 300 mA which is the optimum value for most 30-watt lamps from different manufacturers.
| Input parameters | |
|---|---|
| Mains voltage | 100 ... 240 VAC (± 10 %) 50 ... 60 Hz |
| Fuses | 2x T1, 6 A; Switching capacity H (Manufacturer: Wickmann; Series 181) |
| Power input | max. 70 VA |
| Output parameters | |
|---|---|
| Open-circuit voltage | 140 VDC |
| Operation voltage | 60 to 100 VDC |
| Ignition pulses | 500 V ± 50 V / 1 Hz |
| Output current | 300 mA ± 0,1 % |
| Stability (8h) | 0,1 % |
| Output current ripple | < 0,1 % |
| Preheat voltage | 3 V, 10 V, 12 V |
| Operation heat voltage | 1,5 V, 6 V, 6 V |
| Preheat time | 15 s |
| Interface | |
|---|---|
| Input | Lamp On/Off |
| Safety | as per EN 61010-1 |
|---|---|
| Equipment class | I |
| Protection class | IP 20 (EN 60529) |
| Excess temperature protection | yes |
| Outputs | short-circuit resistant |
| EMV | |
|---|---|
| Interference | EN 61326 (class B) |
| Immunity | EN 61326 appendix A |
| Voltage fluctuations, flicker | EN 61000-3-3 |
| Harmonic current emissions | EN 61000-3-2 |
| Environmental conditions | |
|---|---|
| Ambient temperature | 0 °C to 40 °C |
| Storage temperatur | - 20 °C to + 85 °C |
| Desktop device | |
|---|---|
| Dimensions (HxWxD) | 75 x 220 x 235 mm |
| Weight | 2 kg |
