Light Source LQ-HXP 120
- Description
- Technical data
- Model
- Accessories
- Obtain an offer
This compact device is the ideal external light source for fluorescence excitation in microscopy. Coupling is preferably
achieved via liquid light guides. The average service life of a lamp is 2,000 hours. The optimised internal air flow cools the lamp and enables quiet operation. A resettable operating hour meter shows lamp operating hours. The brightness of the lamp output can be varied in 5 steps (0-100%) by means of a mechanical dimmer unit.
An ultra-fast shutter opens or closes after activation with approx. 6 ms. The shutter is actuated by means of an appliance switch, but is also possible externally by means of a remote control input or CAN-BUS connection.
This compact light source is available as a VIS or UV version in addition to a version that permits the coupling of multi-pin liquid light guides.
| Electrical connection | |
|---|---|
| Mains voltage | 100 up to 240 VAC ± 10 %, 50 up to 60 Hz |
| Power input | max. 210 VA |
| Configuration | |
|---|---|
| Mercury short-arc reflector lamp |
HXP R 120W/45C VIS with focussed reflector (Osram) |
| Filter/ heat protection filter installed in filter holder |
UV-IR Cut - Filter |
| Shutter | electrical control via interface, max. frequency 40 Hz, switching time approx. 6 ms |
| Dimming | mechanically, 5 steps 0 ... 100% |
| operating hour meter | display of lamp operation hours, resettable |
| Interface: shutter activation |
remote control connection for remote signal and foot switch, CAN-BUS-connector on request |
| desktop device | |
|---|---|
| Dimensions (HxWxD) | 210 x 130 x 290 in mm |
| Weight | ca. 4,7 kg |
| Safety | as per EN 61010-1 |
|---|---|
| Equipment class | I |
| Protection class | IP 20 (EN 60529) |
| Safety circuit | switches unit supply off when device lid is opened |
| Excess temperature protection |
switches lamp voltage off in the event of excess temperature, switches on again after cooling |
| Glare shield | light output remains automatically closed as long as no light guide is connected |
| EMC | |
|---|---|
| Interference | EN 61326 (class B) |
| Immunity | EN 61326 appendix A |
| Voltage fluctuations, flicker | EN 61000-3-3 |
| Harmonic current emissions | EN 61000-3-2 |
| Environmental conditions | |
|---|---|
| Ambiente temperature | 0 °C to 40 °C |
| Storage temperature | - 20 °C to + 85 °C |
| Conformity | |
|---|---|
| CE | |
| RoHS |
| Approvals | |
|---|---|
| UL/CSA |
| Configurations | |
|---|---|
| -3 | Storz long light guide mount, active diameter 3 mm |
| -5 | Storz long light guide mount, active diameter 5 mm |
| -X | Multipole LUMATEC D light guide mount |
| Lighting | |
|---|---|
| Replacement bulbs | HXP R 120W/45C VIS |
| Adapter | |
|---|---|
| VIS-Lighting adapter | Leica Motik Nikon Olympus Zeiss for other microscopes on request |
When ordering, please indicate the exact microscope type.
| liquid - light guide LUMATEC serie 380 | 1-pin |
|---|---|
| Ø 3 mm x 2.000 mm | light input: Storz long, light output: Standard |
| other lengths | on request |
| liquid - light guide LUMATEC serie 380 | 2-pin |
|---|---|
| 2 x Ø 3 mm x 1.500 mm | light input: LUMATEC D, light output: 2 x standard |
| other lengths | on request |
| liquid - light guide LUMATEC serie 380 | 1-polig |
|---|---|
| Ø 5 mm x 1.500 mm | light input: Storz long, light output: Standard |
| other lengths | on request |
| Filter | |
|---|---|
| Filter/ heat protection filter | UV-IR-Cut |
| other filters | on request |
| Filter holder with and without filter | on request |
| Remote control | |
|---|---|
| Shutter remote control | hand / foot-actuated switch |
| Remote - cable | on request |
